- Capabilities – 600°F temperature and 30,000 psig.
- Pressurizes with water.
- Slurry cup has an isolation volume chamber in the top to reduce risk of contamination.
- Uses a conventional-style slurry cup.
- Three heater bands. Good heat control.
- Variable speed rotation which allows for more meaningful testing of muds, thixotropic slurries and gels with long delay times.
- No time limit on the test duration. Time is dictated by set time of the cement. Plumbing allows for chilled water circulation for low-temp testing Magnetic-Drive system mounted to the top out of the path of routine operations.
- Drive system is completely isolated from the test chamber. Not required to remove/replace the measurement system for each test.
- The pressure vessel is on a hydraulic lift and it lowers away from the head and moves forward for inserting/removing the slurry cup. Slurry cup volume is same as that for a HTHP Consistometer.
- Completely computer controlled. Fully automated start-up, conditioning, gel strength testing, and shut-down.
